TempleOS – Code Introduction

The TempleOS vs glowing CIA agent design is available at www.d3vur.com

TEMPLE OS INTRO:

TempleOS is a x86_64, multi-cored, non-preemptive multi-tasking, ring-0-only, single-address_mapped (identity-mapped), operating system for recreational programming. It contains a treasure chest full of ‘spells of truth’. Imo a 12 year old child could become a better programmer than 20 year professional C programmers by simply tinkering and around in TempleOS for 6 months to 2 years. This assumes the child has not been exposed to modern gaming systems or mobile phones. TempleOS does not connect to the internet so a parent does not have to worry about corruption by modern culture and porn while the child uses TempleOS. TempleOS is an offering to God. Users of TempleOS can consult God for advice and ask Him questions(thats for the user to figure out so I wont spoil). TempleOS allows the user to create 3D games relatively easily. In just 700 lines of code it is possible to create a fully functioning 3D racing game. The source code for Varoom is shown below.

3D Animated Sprites in Source Code

The incentive for children to learn the inner workings of TempleOS is to make more fun games. The incentive for adults to learn will be creation of better hymns. Creating hymns might not sound appetizing to most people but there are secrets to them (ill leave it at that…). Windows 10 is 50,000,000 lines of code, linux ubuntu is 30,000,000 lines of code, mac ios is 40,000,000 lines of code. TempleOS is 110,000 lines of code. TempleOS is faster than all 3 (for what it was designed to do). They all contain basically the same parts, but TempleOS’s code can be understood within a reasonable amount of time. It would require a lifetime to understand the Windows 10 operating system completely, but it would only take a few months to a year to understand TempleOS. They both contain the same basic components. The creator Terry Davis was a devout Catholic and believer in God. He would often start the introductions to his streams and videos with “Hi, I’m Terry Davis. I’m the smartest programmer that’s ever lived. I was chosen by God to create his temple, and I was given divine intellect.” I used to laugh thinking he was just a weirdo schizo, but after using his OS for a few months I can safely say that Terry was the greatest computer programmer to ever live, he actually was speaking to God, users can speak to God too, Terry legitimately had divine intellect, and Terry is to computer programming what Tesla was to electrical engineering.

The following are the gems of truth within TempleOS I made notes for (so far).

TEMPLE OS NOTES (WIP)

Part 1 – TempleOS HolyC Compiler:

https://www.bitchute.com/video/7qqLzB7ZpORY/

https://www.brighteon.com/2b70f8cd-ffd9-4e30-8c0f-29a8122387ad

Lexical Analyzer:

-Lexical analyzer (lex) makes tokens or more specifically it divides into tokens. Tokens are the smallest unit of interest in code.
-The lexical analyzer gets rid of white space and comments
-All punctuation symbols ( like ‘;’ or ‘(‘ or ‘=’ ) are treated as their ascii value (8bit-unsigned-ascii because 7bit-signed-ascii is retarded)
-Number symbols are converted to their actual value.
-All alpha-numeric symbols used in variables are treated as a TK_IDENT (Token Identifier)
-Symbols that appear after “” (quotes) are treated as a TK_STR (Token String)
-lexical analyzer looks in symbol table every time it has a TK_IDENT because TK_IDENT is a variable and therefore should be on the stack symbol table.

Parser:

-The parser is responsible for putting together the statements and expressions.
-JIT (just in time) compiled code is given a map file/symbol table of all its address independent code. Only Kernel and Compiler are AOT(ahead of time) and they use a ‘hidden’ map file instead of assigning it with the JIT compiler.
-Example of assembly stack for 1+2*3+4

         PUSH    1
         PUSH    2
         PUSH    3
         POP     RAX         //3
         POP     RDX         //2
         MUL     RAX*RDX     //6
         PUSH    RAX         //6
         POP     RAX         //6
         POP     RDX         //1
         ADD     RAX+RDX     //7
         PUSH    RAX         //7
         PUSH    4           //4
         ADD     RAX+RDX     //11

-Terry calls it “Reverse Polish”
-Everything that gets loaded into a register has to be converted to 64 bit. If its 8 bit in memory, the compiler will convert it to 64bit. Makes shit easier to deal with and helps make things simpler for the compiler.
-The ‘if’ statement starts with ‘if’, the ‘for’ statement starts with ‘for’, and in TempleOS the ‘stdout'(printing to screen) statement starts with “(quote).
-Expressions are simply a statement followed by a semi-colon or comma.

Optimizer:

-TempleOS uses an intermediate stack machine that doesn’t use registers with arguments. It does this so that the optimizer(opt) can substitute registers for common offsets.
-Example of the ‘RBP’ stack frame used in the intermediate stack machine:

         18    [RBP]
         10    [RBP]
         8     RIP
         0     RBP
         -8    LOCAL 1 //LOCAL is an offset from RBP -8 in this case
         -16   LOCAL 2 //same but -16

-In optimizer TempleOS checks to see how many times each offset (LOCALs) are used in the function. Lets say LOCAL 1 was used 10 times and LOCAL 2 was used 5 times. TempleOS sets the most commonly used offsets(in this case LOCAL 1) to RSI, to allocate registers

        PUSH    RBP
        MOV     RBP,RSP
        PUSH    RSI
        SUB     RSP, 32
        ....
        POP     RSI
        LEAVE   //Cleans up the repetitive actions in other example
        POP     RBP
        RET

-OPCODE is the only code in the parser that will be uppercase. It tells the parser to convert to assembly
-TempleOS has unstandard opcodes, ex. he has a 1 operand IMUL and 2 operand IMUL2.
-Terry uses a nobound_switch for checking intermediate code within compiler (in C:/Compiler/OptPass789A.CPP.Z). Im not familiar with nobound_switches so Im not sure of the significance of that.
-After the last pass (OPTPASS789A.CPP.Z) the JIT creates the codes ‘map file’ because it will have the final size then.

Assembler and Backend Compiler:

-Unassembler sorts the opcodes then does binary search for each opcode it encounters.
-IC_ equals intermediate machine code
-Intermediate code functions need to be bound to C code that gets built during boot. You could potentially do some crazy fuckin shit with this.
-Example:
-In the file C:/Compiler/CompilerA.HPP.Z you add the name of the intermediate code you want to add like so:

#define IC_SQR_I64 0xB2

-In the file C:/Kernal/KernalB.HC.Z you bind the above to C header.
-‘intern’ means internal function, public is needed because it needs to be bound to C code.

public intern IC_SQR_I64 I64 SqrI64(I64 i); 

-In KernalA.HC.Z TY is short for ‘TYPE’:
-Type accounts for the addressing mode and the size within the backend of the compiler
-TY_NULL = type mode null
-TY_IMM = type immediate mode
-TY_REG = type register mode
-TY_DISP = type displacement mode
-TY_SIB = type index register SIB mode (whatever that means)
-TY_RIP_DISP32 = type RIP relative mode (REL32)
-TY_STK = type stack mode (original stack that started as the system stack, now everything is done with registers and you do not normally use the system stack like how it was originally intended to be used.)
-TY_MASK = type mask mode (? terry doesn’t say im guessing)
-In C:/Compiler/BackA.HC.Z (Backend compiler aka where the intermediate code is handled)
-Sprite and float constants are treated just like string constants in that they are both dealt with after the function code.
-The arguments for the functions are t1, r1, d1 which mean ‘type'(see above), a ‘register'(see parser), and ‘displacement’.
-C:/Compiler/BackFA.HC.Z contains the floating point backend routines.
-The last thing the compiler does is turn code into binary and this can be seen in the file C:/Compiler/Compiler.BIN.Z

Interesting Statements from Terry:

-Parsing an expression with operator precedence is the hardest part of making a compiler.
-Bitwise shift left and right should be given highest precedence level because it breaks nothing and makes bitwise operations faster.
-Terry doesn’t like Macros. He started making type defs but it turns out they are not needed.
-One of Terrys TempleOS principles is minimal abstraction. In modern software, many things are abstracted by developers because it SEEMS to make the code simpler to understand and manage(I was one of these devs), but in reality it only makes it simpler for developers on the project while anyone else that comes along later to read the code is left confused and lost because of the esoteric abstraction. Terry says that basically anything that has to be ‘looked up’ is an abstraction.
-What Terry meant by ‘all my code is position independent’ is that the code is patched in at load time with position independent addresses (which can be seen with the codes REL32 export table and import table in the BinRep; function call).

Differences between Normie OSs and TempleOS:

NormalOSs:

-generate intermediate files
-use streams
-lex is a function call of the parser.
-int i = ‘ABCD’; is not allowed, it has to be only 1 char because of TK_CHAR in C lexical analyzer
-preprocessor–>lex()–>parser–>opt–>backend

TempleOS:

-does not generate intermediate files
-does not use streams
-preprocessor and lex are ‘merged’ in that the # used in #include and #define is treated as a token in lexical analyzer.
-I64 i = ‘ABCD’; is allowed, it can be 8 bytes rather than 1 byte char (i think is called TK_CUR_CHAR).
-lex–>parser–>opt–>backend

Other Notes:

-F; = Find()
-FF; = FindFile(file);
-DocMax; = toggle cmdline buffer max length on or off.
-BinRep; is a convenient report that will print out the codes position independent address and its export table.

Part 2 – TempleOS System Guide:

What Happens During Boot:

-On boot it loads OSMain.BIN
-First task is Adam on the ‘bootstrap’ processor aka core0 processor.
-Then osmain is loaded into the bottom 640k
-Changes to 64 bit mode.
-Loads in compiler
-Then ExeFile(“Adam1.HC.Z”) is called which is like the autoexec.bat file.
-Adam is first task
-Each task has a symbol table(hash table or map file) kinda like environment variables except it can have functions, variables, classes, and applications in addition to folders/directories.
-Each task has a heap.
-Child tasks inherit symbols of parent task (usually Adam)
-Everything goes into 1 ‘header’ file
-Dont need object files, dont need executable files.
-Then Adam2.HC.Z is called
-No difference between a Task, Process, and Thread. Everything is a Task in TempleOS. This greatly simplifies multi-threading.

Other Notes:

-Fs = Fs current segment register and it points to the current task record
-ClassRepD; = ClassReport I think the ‘D’ means dump.
-ClassRepD(Fs); will print out everything the current task register is doing and the values can be changed dynamically. Prints out task record. Memory can be changed in real time off the print out, insane lol.
-DrvRep; = DriveReport. Will print out drives.
-B Drive is the RedSea File system
-To get to B Drive simply Cd into it or do the cmd Drv(B);
-The cmd Dir(“*”,TRUE); the ‘TRUE’ flag lists file clusters which is helpful in the B Drive.
-A neat trick to do with this is to copy the current directory cluster hex address into the cmd DCluster(0x0042, TRUE); which will print out an editable listing of the Cluster. ‘TRUE’ makes it so user can write to the file right there in hex cmd print out.
-MemBIOSRep – Bios Memory Report

Part 3 – TempleOS Programming Guide:

Profiler:

-Set DocMax; to set cmd line buffer to unlimited
-DocMax;ProfAll;Function;ProfRep;
-Escape the function and you get a profile report(ProfRep;)

Document Forms:

-Use Ctrl-L helps insert various dollar sign commands.
-Look at DolDoc (DD) formatting code by pressing Ctrl-T
-DolDoc stands for Dollar Document.
-To change the text color just type $PURPLE$ and then $FG$ when you are done and it will change the text foreground color to purple then switch back to the default color black(FG =foreground default).
-Use $ signs like parenthesis, they are the start of a DolDoc 2-letter command(besides text color which has no 2 letter command).
-At first the Ctrl-L shortcut hotkey greatly simplifies inserting DolDoc links, modified text, a directory tree branch, setting the page settings (size, page breaks, word wrap etc), buttons, macros, check boxes, define lists, menu values, songs, html, hex numbers, data types (in a DolDoc). Once you’ve inserted something with Ctrl-L menu you can press Ctrl-T to switch to plain text and look at the actual $ commands.
-After awhile you no longer need to use Ctrl-L and can just press Ctrl-T and start typing your $ DolDoc 2-Letter command, but it still remains useful when doing the more complex formatting commands like macros and linkage with flags.
-Be careful when using the shortcuts for color Alt-Shift-F1-4 because you can end up inserting multiple commands dollar commands and could produce behavior that you didn’t want.

Debugging:

-D(Fs); dumps the current task
-DocD(Fs); dumps the current task and is dynamic meaning it can be changed from the print out.
-I’ve never found the need to use it, I usually just exit the vm and boot TempleOS back up in a microsecond, haha. Why waste time with a debugger when you can close and open the OS in a microsecond.

Disk Code:

-Half a microsecond to swap tasks. It takes longer for the computer to read the port than it does to swap the task.
-This means things like coroutines, generators, closures and ‘async generators’ will run orders of magnitude faster on TempleOS than on any normal operating system.
-Terry demonstrated this in the video labeled ‘MIT BTFO by Terry A Davis‘. He shows that TempleOS can do around 4 million task swaps a second while normal operating systems can only do around 40 thousand task swaps a second. I previously did not understand the significance of that statement.
-After recently becoming proficient with coroutines, generators, and async generators in python 3.8 I now understand the significance of Terry’s statement.
-This basically means coroutines, generators, and async generators could run 100 times faster on TempleOS than on any other operating system.
-Coroutines, generators, and async generators already run very quickly on normal operating systems, in fact they are arguably the best way to drastically increase performance of a slow piece of code and are arguably faster than the much more complex and difficult to deal with multi-threading.
-This means that what is already the best method for drastically increasing performance gets amplified by 100 times on TempleOS. This is extraordinarily significant.
-Will require more testing, as well as learn how to implement a coroutine, generator, and async generator in HolyC.

Try Catch:

-Fs (current task register) can point to Fs->except_argc and Fs->except_argv[0] and thats how you can access the values that were thrown.
-To catch it you do Fs->ignore_except=TRUE; or Fs->catch_except=TRUE;

Other Notes:

-To turn a program into a binary(AOT) instead of a JIT compiled program the programmer can insert the following at the top of their code:

#include "::/SparrowOS/OSMain/StaticAdam.HPP.Z"  (Havent found the TempleOS equivalent, weird...)

-BinRep(“Test.BIN.Z”); = Binary Report and gives tips.
-Always use Enter/Leave it makes it easier for the compiler and user.

4 Comments

  1. Hi just wanted to give you a brief heads up and let you know a few of the pictures aren’t loading properly. I’m not sure why but I think its a linking issue. I’ve tried it in two different internet browsers and both show the same results.

    Like

    1. ill look into it

      Like

  2. Hey SoT! What’s up man, this is “GenPop” you’re friendly neighborhood H4sht4g c0nspir4cybuddy. I managed to find my old WinXP laptop I had gotten after graduating highschool, believe it to be made in the early 2000’s. Based on our previous conversations about chipset models, if I were to use it as say, an airgap server, what OS/software combination would you suggest to help discourage prying eyes (preferably in conjunct with my existing newer systems). Decided based on what you’ve said to not fool with that whole TG23 thing. Instead rather, I’m trying to make a team with goals that instead more or less reflect your blog post regarding “God’s Warrior” on a sort of digital capacity, instead telling would be orcas in the sea to instead stay out of conflict and observe/share talents, resources, insights/ultimately do what we can to try and foster virtues, depolarization, and essentially gain momentum in a way that can effectively act as a means to serve humanity however we can in “ruthless pursuit of honor”… We have a Discord we’re using atm, there’s about 7 of us, all with different gradients of knowledge and skillsets. There’s a program called Nox that apparently uses end to end military grade encryption with much of the same capabilities, might be swapping over to that sort of platform. Do you know anything regarding the “Locust 0133” game as a side note? Hope all is well, gratitude once again for sharing your wisdom and taking time out of your day to shed some of your insight towards a stranger. Promise that your words were not said in vain friend. I’ve shared some of your videos with people that seemed to have really enjoyed some of the themes you presented, namely the fig one)… I’m considering the endeavor of teaching myself, or rather, modernizing my own programming talents. Aside from Temple, are there any languages, compiler environments (preferably 64bit win but I’ve got a little bit of experience with the Penguin named after the vedic goddess of destruction that starts with a K), tutorial docs/videos, or otherwise related resources you’d recommend someone with a basic level of C++/Pascal/HTML background?

    takarious@gmail.com is an email if you ever feel the need to contact me outside of YT or here
    I have a reddit, don’t off the top of my head remember my Reddit name (nor do I really understand the benefit of using that platform, maybe you can talk me into it)

    Click to access Copy_of_Copy_of_2014-01_-CODE_BLUE-_Intel_ME_Secrets.pdf


    Click to access 2012-10_-Breakpoint-_Rootkit_in_your_laptop.pdf

    Liked by 1 person

    1. Conspiracy buddy! How are ya?! If you can run TempleOS on hard metal its 100% secure. This is because it doesn’t have networking unless programmer implements it, see ‘ShrineOS'(or ZenithOS) for an example of a programmer implementing tcp socket streams using TempleOS(not the most divine intellect way to implement networking in my opinion but networking is difficult beast to wrap the head around so I don’t blame them choosing the most common way to do networking). You might be able to find hardware that can run TempleOS from boot thats post 2008 but most hardware post 2008 uses UEFI which TempleOS does not implement because its over-complicated glow in the dark CIA bullshit https://wikileaks.org/ciav7p1/cms/files/UEFI%202_5.pdf . Iirc Terry said that UEFI disables certain legacy BIOS features that prevent TempleOS from being used on hard metal, I think he said ‘they disabled them because they are mean.’ In other words there was no reason to disable the legacy stuff other than to be mean to Terry. That sounds crazy but I honestly think Terry is right, the CIA were just being spiteful bullies. If you search the TempleOS_Official subreddit there was a guy who got TempleOS running from a raspberry pi 4. Check out the discord from the TempleOS_Official sub, they are based as f. Also check out the Portuguese channel https://odiariodeumet.wordpress.com/ (you might have to use Google Translate) he figured out the divine intellect of TempleOS before I ever did. He recommends using AmigaOS to get around surveillance, and I suspect AmigaOS is the best method for doing this. Its a very minimal OS but is more like modern OS’s and has networking. I haven’t tried it yet, but I’ve heard from multiple skilled programmers that its a good OS for privacy.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s